RV Pre-Inspection Checklist
We designed this checklist to help you get the most complete and thorough RV inspection possible.
The condition of the RV at the time of inspection directly affects what we can test. The more prepared the RV is, the more we can inspect and the more confidence you will have in making an informed decision.
This is a team effort. Buyers, sellers, and dealerships all play a role in making sure the RV is ready. Taking a few steps ahead of time helps us start on time, work efficiently, and deliver the most complete inspection possible.
Quick Checklist (Before RV Inspection Day)
Use this as a quick reference and share it with the seller or dealership:
- What happens if the RV is not ready for the inspection?
- Why do RV inspections start at 9:00 AM and take several hours?
- Can anything else be scheduled during the RV inspection?
- Do I need shore power for an RV inspection?
- Does the RV refrigerator need to be on before the RV inspection?
- How much propane is required for an RV inspection?
- How much fuel is required to test the generator during an RV inspection?
- Does the RV need water connected for the RV inspection?
- Why do batteries need to be installed during RV inspections?
- How much space is required around the RV?
- Do personal items need to be removed before the RV inspection?
- What keys are required for the RV inspection?
- Do you provide power, water hoses, or sewer connections?
- Why should the seller or dealership be contacted the day before?
- When will I receive my RV inspection report?
- How do I review my RV inspection report?
RV Pre-Inspection Checklist FAQs
If the RV is not fully prepared, we may not be able to complete all portions of the inspection and rescheduling may be required. Rescheduling fees apply*
We will complete as much of the inspection as possible, but if required items are not in place, certain systems cannot be tested and your report may be limited.
We start every inspection at 9:00 AM so we have enough time to complete a thorough inspection and deliver your report the same day. All inspections last a minimum of 5 hours, and some can take 8 hours or more depending on the RV.
The RV cannot be inspected while repairs, detailing, or walkthroughs are in progress.
These activities limit access, interrupt testing, and compromise the accuracy of the inspection. We need full access to all areas and systems to complete a thorough evaluation.
The RV must be connected to proper 30A or 50A shore power.
Household outlets do not provide enough power and can cause systems to not run correctly or give misleading results. In some cases, running on the wrong power source can even cause damage to appliances and components.
Even if the RV has an onboard generator, we still need shore power to fully test all three electrical systems in the RV.
RV refrigerators must be powered on before the inspection so we can verify proper operation.
RV-type refrigerators require at least 12 hours to cool down to the proper temperature. If the unit is not pre-cooled, we cannot confirm that it reaches and maintains temperature, which leaves the test incomplete.
The RV must have propane at least ½ full so we can fully test propane-powered systems.
We use propane to operate the furnace, water heater, and refrigerator in LP mode. Without enough fuel, we cannot confirm that these systems are working properly under normal conditions.
The RV must have engine or generator fuel at least ½ full so we can run the generator under load.
We test the generator by running air conditioners and other systems for an extended period to verify performance under real conditions. Lower fuel levels can sometimes cause the system to shut down before testing is complete.
The RV must be de-winterized and the freshwater tank must be completely full. Ideally, the RV should also be connected to city water.
This allows us to test on city water and then switch to the onboard system to make sure everything is working properly in both scenarios.
The RV must have batteries installed and operational because they power most of the RV’s core systems, appliances, and components.
Batteries supply power to control boards, slideouts, and many other components. Without batteries, we cannot test most systems.
The RV must have enough space to fully extend and retract all slideouts and awnings, and to safely move a ladder around the unit.
If space is limited, we may not be able to fully test certain components and it can create safety concerns for both the inspector and the RV. If we cannot safely position a ladder, we cannot fully inspect the roof, slideout tops, or upper sidewalls.
Ideally, all personal contents are removed from the RV during the inspection.
At a minimum, we need access to key areas such as cargo bays with components installed and under kitchen and bathroom sinks.
Personal items must also be removed from any areas that would prevent slideouts from fully retracting and extending.
The RV must have all necessary keys available, including entry doors, cargo bays, fuel doors, and the ignition for motorhomes.
Without keys, we cannot access certain areas or test engine and cab systems, which limits the inspection.
We do not supply power sources, water hoses, sewer connections, or any other accessories needed to set up the RV for inspection.
The RV must be ready for inspection with all required utilities and connections before we arrive so we can begin on time and avoid delays in delivering your inspection report.
We require our customers to confirm the day before that the RV is located, accessible, and set up with the required utilities.
This helps us start on time and avoid delays in delivering your inspection report the same day. It’s a team effort, and everyone should be working together to make sure the inspection goes as smoothly as possible.
We almost always deliver your inspection report the same day, unless travel or technical issues cause a delay.
Once the RV inspection is complete, you’ll get a text when your report is ready to view.
Start by going through the report, including the video, and use it to create your Request/Punch List to organize anything you want to bring back to the seller.
If you have questions after reviewing everything, you can reply to the text to discuss specific items.